emma
Cherries > Peaches Level: 97
Posts: 1375/2182 EXP: 9064786 For next: 252572
Since: 1.8.02 From: Phoenix-ish
Since last post: 445 days Last activity: 167 days
| #1 Posted on 14.7.07 1821.26 Reposted on: 14.7.14 1823.10 | I've got a Linksys Wireless (G) Access Point here -- WAP54G. Last I used it, it was working fine, & it's been back in its box for about a year. I plug it in, the Power & Link lights come on on the front panel for about 6 seconds, then they both go out. Grr. Have I got fried hardware? Is there any way I can tell for sure?
There is a reset button on the back -- doesn't help. Don't know of any power surge or anything that might have hit it since it last was working correctly. I don't have another 12V DC, 0.5Amp power supply to try.
Any thoughts before I have to head over to Fry's & drop $50 ? Promote this thread! | | Merc
Potato korv Level: 59
Posts: 584/680 EXP: 1597877 For next: 75261
Since: 3.1.02 From: Brisbane, Australia
Since last post: 4732 days Last activity: 4711 days
| #2 Posted on 15.7.07 0147.22 Reposted on: 15.7.14 0147.26 | The only thing I could find about the LEDS said reset the device to resolve it. But that specified blinking LEDS, so it may not apply It seems the reset button has to be pushed for differing lengths of time depending on which revision you have - between 10 seconds and 30 seconds. | Guru Zim
SQL Dejection Administrator Level: 152
Posts: 4496/6207 EXP: 44132224 For next: 169538
Since: 9.12.01 From: Bay City, OR
Since last post: 8 days Last activity: 15 hours
| ICQ: | |
| Y!: | |
|
| #3 Posted on 15.7.07 1648.09 Reposted on: 15.7.14 1648.22 | Hmm I am stumped. Any chance it is the incorrect power supply?
I think I have one of these in a box upstairs somewhere... but I think my brother in law did something with a Linux image on it or something like that.
Is it a vanilla out of the box 54g or did you change the software on it? | emma
Cherries > Peaches Level: 97
Posts: 1377/2182 EXP: 9064786 For next: 252572
Since: 1.8.02 From: Phoenix-ish
Since last post: 445 days Last activity: 167 days
| #4 Posted on 15.7.07 1728.38 Reposted on: 15.7.14 1729.02 | Originally posted by Merc The only thing I could find about the LEDS said reset the device to resolve it. But that specified blinking LEDS, so it may not apply
I tried holding down the reset from as soon as I apply power, & the lights go out regardless.
Originally posted by Guru Zim Any chance it is the incorrect power supply?
*Shouldn't* be any reason it's the wrong adapter. I haven't been able to find anyplace online that tells what the specs on the adapter should be. This is a ver3.1 box, BTW. (There's a post from a moderator on a Linksys message board indicating that they changed the power supply between v2 & v2.2 from 500mA to 1000mA -- yeesh. And I've got a 500mA here, FWIW.)
Originally posted by Guru Zim Is it a vanilla out of the box 54g or did you change the software on it?
Totally vanilla.
Hardware is not my friend. | Guru Zim
SQL Dejection Administrator Level: 152
Posts: 4497/6207 EXP: 44132224 For next: 169538
Since: 9.12.01 From: Bay City, OR
Since last post: 8 days Last activity: 15 hours
| ICQ: | |
| Y!: | |
|
| #5 Posted on 15.7.07 2013.37 Reposted on: 15.7.14 2014.23 | I knew something sounded wrong when I posted that - I have a WRT54G which is the one that you can do all sorts of hacking to. I don't know a thing about the WAP. Sorry.
//edit I also have a WRTP54g with Vonage ports on it, but that won't help much either.
(edited by Guru Zim on 15.7.07 1815) | emma
Cherries > Peaches Level: 97
Posts: 1378/2182 EXP: 9064786 For next: 252572
Since: 1.8.02 From: Phoenix-ish
Since last post: 445 days Last activity: 167 days
| #6 Posted on 16.7.07 1651.00 Reposted on: 16.7.14 1651.26 | Thanks for the try, guys. I guess I'm off to Fry's... | ALL ORIGINAL POSTS IN THIS THREAD ARE NOW AVAILABLE |
| | | | | | |